DataNet Receiver/Repeater


  • Demo Image
  • Demo Image

The DNR900A is a dual functionality device, operating as either a Receiver or Repeater in the DataNet network.

When configured as a Receiver, the DNR900A is the gateway between the PC and devices joined to the wireless DataNet network. Connected to the PC via a mini-USB cable, each Receiver manages a single network supporting all DataNet models, and is powered by the DataSuite data analysis software. More than one Receiver may be connected to the PC, thereby supporting monitoring of multiple DataNet networks using a single DataSuite installation.

When configured as a Repeater, the DNR900A may be deployed to increase the effectiveness and robustness of the mesh network by providing multiple transmission routes between logger and PC. And the DNR900A’s long transmission range can be leveraged to increase the overall network range, for relaying data from loggers located far from the PC.

Key product benefits:

  • Dual functionality with both Receiver and Repeater capabilities
  • Repeater offers reliable, long-range transmission for building large mesh network
  • Multiple network support on single PC
  • Intuitive interface with LCD and keypad
  • External alarm output for onsite visual/audible alarm notification
  • Powered by 12 VDC with internal back-up battery in event of power failure
  • 21 CFR Part 11 compliant

2.4 GHz
Units per network
Up to 65,000
Data rate
250 Kbps
Full mesh network architecture supported

128-bit network security encryption

Worldwide license-free

RF Transmission
17 dbm

2-row LCD with 16 character display
2-button keypad for standalone operation
Power Supply
Internal rechargeable 4.8 V 800 mAh NiMH battery

External 12 V DC input @ 300 mA 3.6 VA

Back-up battery life up to 3 hours
PC Interface
Mini USB type B cable
Operating Temperature Range
-20 to 50 ˚C
Plastic ABS box
9.7 x 9.3 x 2.7 cm
200 g
Mount Table and wall mounting
Standards Compliance
CE, FCC, IC Canada, IP54