MicroLite USB 0-10 V Voltage data Logger
This MicroLite logger measures voltage over a range of 0 to 10 Vdc, with accuracy of ±5 mV. Offering a 32,000 sample cyclic memory, the MicroLite Voltage logger features a USB interface for easy connection to a PC for user configuration, data download and sensor calibration using the free Windows-based DataSuite data analysis software.
The logger’s external input includes two screw terminals for easy wire-up, with scalable units supported by the software and device LCD. You can setup low and high alarm thresholds and view the logger data on the 4-digit LCD, which scrolls between the current and minimum/maximum readings. The LED provides additional sample and alarm indication in the event the LCD is off due to the MicroLite’s power save mode.
The logger is designed for both portable and stationary multi-use operation with a replaceable 3V coin battery lasting up to 1.5 years, depending on the operating conditions.
Together with the DataSuite software the MicroLite External Temp logger is also 21 CFR Part 11 compliant.
Key product benefits:
- Measurement range of 0 to 10 Vdc
- Direct USB interface for setup, alarm and data download
- Supporting Boomerang feature for automatic emailing of PDF report on PC connection
- Multiple activation modes: Timer, Push to Run, Immediate
- LED for alarm and sampling indication
- Four-digit LCD with decimal point
- 32K cyclic sample memory
- Free DataSuite software supporting data analysis and device setup
- Dust and water resistant, IP54
||0 to 10 Vdc
||1 mV (logger display), 4 mV (software display)
||Minimum: Once every second, Maximum: Once every 18 hours
|Auto PDF & Email Delivery (Boomerang Feature)
||Four-digit, 7-segment LCD with decimal point
||Yes, for alarm and sampling indication
||Replaceable CR2032 3V lithium battery
||~ 1.5 years depending on sampling rate and operating conditions
||14 x 3.9 x 2.6 cm
||Logger cradle accessory provided
||-40 to 80 °C
||21 CFR Part 11, CE, EN12830, IP54